Geberit North America

Parts and Accessories

For Geberit Duofix installation systems

Are you facing a special installation challenge? The tables below will help you find just the right installation accessories to get the job done. Here you can also find replacement parts for our Duofix in-wall systems.

Click any category title or drop-down arrow to get started.

Part No. Description Spec Sheet Installation Manual Repair Parts List Price (USD)
111.013.00.1
  • Frame to wall anchoring for 5.125"-7.875" (13-20cm) thick unfinished pre-wall
  • For use with Geberit Duofix Carrier 111.798
 PDF PDF   $33.00
111.064.00.1
  • Frame to wall anchoring for use where foot installations into floor are not allowed
  • For 5.125"-9.5" (13-24cm) thick unfinished pre-wall
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.434, 111.490, 111.520, 111.524, 111.625, 111.728
 PDF     $92.00
111.815.00.1
  • Frame to wall anchoring for 5.125"-7.875" (13-20cm) thick unfinished pre-wall
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.434, 111.490, 111.520, 111.524, 111.625
 PDF PDF   $48.00
111.835.00.1
  • Frame to wall anchoring for 5.125"-7.875" (13-20cm) thick unfinished pre-wall corner installations
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.434, 111.490, 111.520, 111.524, 111.625, 111.728
 PDF PDF   $48.00
111.847.00.1
  • Support brackets for wall-hung toilets with small contact surface (thin profiles)
  • For use with Geberit Duofix Carriers 111.255, 111.335
 PDF     $67.00
111.863.00.1
  • Fire protection set for Sigma concealed dual-flush tanks, 90 min.
  • Fire resistance to DIN EN 1364-1:1999-10
  • For use with Geberit Duofix Carrier 111.335
 PDF PDF   $728.00
111.868.00.1
  • Fastening set for sinks with 14.9"-22.8" (38-58cm) mounting centers
  • For use with Geberit Duofix Carriers 111.434, 111.490
 PDF     $159.00
111.869.00.1
  • Frame to stud fastening set for extended stud spacing from 19.75"-25.56" (50-65cm)
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.434, 111.490, 111.520, 111.524, 111.625
       $48.00
111.887.00.1
  • Frame to wall anchoring extensions for 7.875"-15.75" (20-40cm) thick unfinished pre-wall
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.434, 111.490, 111.520, 111.524, 111.625, 111.728
 PDF     $21.00
242.042.00.1
  • Crossbar for inlet, 1/2" thread
  • For use with Geberit Duofix Carrier 111.625
 PDF     $151.00
242.309.00.1
  • For retrofitting already installed Geberit Duofix urinal elements from inlet 32 mm to R1/2" thread
  • For use with Geberit Duofix Carrier 111.625
 PDF     $151.00
243.168.00.1
  • Rough-in set for surface-even mounting of flush and cover plates
  • Required for use with Sigma60 and surface-even cover plates
       $22.00
465.034.00.2
  • Elbow supply fitting set, gun metal
  • For use with Geberit Duofix Carriers 111.434, 111.490, 111.520, 111.524
 PDF     $52.00
 
Part No. Description Spec Sheet Installation Manual Repair Parts List Price (USD)
152.404.11.1
  • Connector set with mounting hardware (bowl installation kit)
  • HDPE waste fitting
  • Alpine White cover caps
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.728
 PDF     $62.00
156.050.00.1
  • Acoustic insulation set for wall-hung toilets and bidets
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.520, 111.524, 111.728
 PDF     $26.00
217.713.11.1
  • Cover caps with leveling washer
  • Plastic - Alpine White finish
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.434, 111.490, 111.520, 111.524, 111.728
 PDF     $13.00
405.116.00.1
  • HDPE connection set with 1" (2.5cm) offset and mounting hardware (bowl installation kit)
  • With socket for Ø3.50" (Ø90mm) push fit piping and Ø55mm supply inlet
  • Matte Chrome cover caps
  • For use with Geberit Duofix Carriers 111.255, 111.335, 111.728
 PDF PDF   $313.00
249.801.00.1
  • Water supply hose for bidet seat
  • For adding bidet seat to an installed carrier
  • For use with Geberit Duofix Carriers 111.012, 111.255, 111.355, 111.728
 PDF PDF   $161.00
240.839.00.1
  • ater supply hose for bidet seat
  • For adding bidet seat to an installed carrier
  • For complete installation, order with 249.801.00.1
  • For use with Geberit Duofix Carriers 111.012, 111.255
 PDF     $90.00
243.173.00.1
  • Water supply hose for bidet seat
  • For adding bidet seat to an installed carrier
  • For use with Geberit Duofix Carrier 111.798
  • For complete installation, must order with 249.801.00.1
 PDF     $67.00
Part No. Description Spec Sheet Installation Manual Repair Parts List Price (USD)
366.887.16.1
  • HDPE straight connector with socket for Ø3.50" (Ø90mm) push fit piping and Ø3.50" (Ø90mm) outlet x 12" (31cm) long
  • For use with Geberit Duofix Carriers for Wall-hung Toilets
 PDF     $48.00
366.913.16.1
  • HDPE connector with offset for left-hand horizontal drain connections (as viewed from sitting position)
  • 1 x 90° bend with socket for Ø3.50" (Ø90mm) push fit piping, with 45° offset and Ø3.50" (Ø90mm) outlet for 5.5" (13.97cm) minimum walls only
  • For use with Geberit Duofix Carriers for Wall-hung Toilets
 PDF     $103.00
366.914.16.1
  • HDPE connector with offset for right-hand horizontal drain connections (as viewed from sitting position)
  • 1 x 90° bend with socket for Ø3.50" (Ø90mm) push fit piping, with 45° offset and Ø3.50" (Ø90mm) outlet for 5.5" (13.97cm) minimum walls only
  • For use with Geberit Duofix Carriers for Wall-hung Toilets
 PDF     $103.00
367.072.18.1
  • Cast iron outlet bend
  • 1 x 90° bend with socket for Ø3.50" (Ø90mm) push fit piping and 3" CIP outlet
  • 1 x 2" NPTF heel outlet
  • For use with Geberit Duofix Carriers for Wall-hung Toilets
Note: Use in place of 367.071.18.1
 PDF     $312.00
367.485.16.1
  • HDPE "back-to-back" connector for horizontal drain connections
  • 2 x 90° bends with sockets for Ø3.50" (Ø90mm) push fit piping, with 45° offset and expansion to Ø4.375" (Ø110mm) outlet for 10.75" (27.31cm) minimum walls only
  • For use with Geberit Duofix Carriers for Wall-hung Toilets
 PDF     $212.00
367.923.16.1
  • HDPE "back-to-back" connector for vertical drain connections
  • 2 x 90° bends with sockets for Ø3.50" (Ø90mm) push fit piping and expansion to Ø4.375" (Ø110mm) outlet for 10.75" (27.31cm) minimum walls only
  • For use with Geberit Duofix Carriers for Wall-hung Toilets
 PDF     $206.00
152.647.00.1
  • PP connector set with bend for floor-mount toilets
  • 1 x 90° bend with socket for Ø4.375" (Ø110mm) push fit piping for Ø3.82"-4.21" (Ø97-107mm) male connection and expansion to Ø4.375" (Ø110mm) outlet
  • Includes mounting hardware
  • For use with floor-mount, back outlet toilet
 PDF PDF   $159.00
366.061.16.1
  • HDPE outlet bend, 1 x 90° bend with socket for Ø3.50" (Ø90mm) push fit piping and Ø3.50" (Ø90mm) outlet x 12" (31cm) long
  • For use with floor-mount, back outlet toilet
 PDF     $31.00
152.950.11.1
  • PE syphon trap with horizonal outlet and seal
  • Ø1.96" (Ø50mm) outlet
  • For use with urinal carrier 111.625
 PDF     $49.00
152.951.11.1
  • PE syphon trap with vertical outlet and seal
  • Ø1.97" (Ø50mm) outlet
  • For use with urinal carrier 111.625
 PDF     $49.00
Part No. Description List Price (USD)
119.668.00.1
  • Seal for supply inlet tube, EPDM
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $5.00
152.404.46.1
  • Connector set with mounting hardware (bowl installation kit), HDPE
  • Matte chrome cover caps
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $62.00
152.424.00.1
  • Seal for toilet outlet connector, EPDM
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $7.00
240.172.00.1
  • Plastic mud guard protection housing, comes standard
  • For use with Geberit Kappa concealed tanks 2x6
 $33.00
240.269.00.1
  • Angle stop valve to concealed tank (blue handle)
  • For use with Geberit Sigma and Kappa concealed tanks 2x6
 $29.00
240.638.00.1
  • Dual flush valve
  • For use with Geberit Kappa concealed tanks 2x6
 $36.00
240.771.00.1
  • Seal kit for filling valve Type 380
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $15.00
240.922.00.1
  • Seal kit for braided hose, EPDM O-Ring
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $6.00
241.167.00.1
  • Yoke set for flush valves
  • For use with Geberit Sigma concealed tanks 2x6 and 2x4
 $15.00
241.290.00.1
  • Dual-flush valve complete with valve seat basket
  • For use with Geberit Sigma concealed tanks 2x4
 $45.00
241.291.00.1
  • Flat gasket for flush valve
  • For use with Geberit Sigma concealed tanks 2x4
 $5.00
241.293.00.1
  • U-cup seal for valve basket
  • For use with Geberit Sigma concealed tanks 2x4
 $6.00
241.469.00.1
  • Filling valve Type 380
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $40.00
241.826.00.1
  • Mud guard protection housing, plastic
  • For use with Geberit Sigma concealed tanks 2x6 and 2x4
 $18.00
241.868.00.1
  • U-cup seal for valve basket
  • For use with Geberit Sigma and Kappa concealed tanks 2x6
 $5.00
242.269.00.1
  • Valve seat basket and noise bushing for flush valve
  • For use with Geberit Sigma concealed tanks 2x4
 $22.00
242.414.00.1
  • Stop valve to concealed tank (blue handle)
  • For use with Geberit Sigma concealed tanks 2x4
 $24.00
362.771.00.1
  • Seal for concealed flush pipe, EPDM
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $5.00
366.061.16.1
  • HDPE waste fitting outlet bend
  • 1 x 90° bend with socket for Ø3.50” (Ø90 mm) push fitpiping and Ø3.50” (Ø90 mm) outlet
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $31.00
387.282.00.1
  • Seal for outlet bends, EPDM
  • For use with Geberit Sigma and Kappa concealed tanks 2x6 and 2x4
 $7.00
816.418.00.1
  • Flat gasket for flush valve
  • For use with Geberit Sigma and Kappa concealed tanks 2x6
  • Set of 10
 $5.00
Part No. Description List Price (USD)
152.693.00.1
  • Seal for connector, EPDM
  • Ø1.97” (Ø50 mm) outlet
 $6.00
152.950.11.1
  • Syphonic trap with horizontal outlet and seal, PE
  • Ø1.97” (Ø50 mm) outlet
 $49.00
240.315.00.1
  • Waste fitting outlet bend, PE; 1 x 90° bend
  • Ø2.48” / Ø1.97” (Ø63 / Ø50 mm)
 $33.00
242.516.00.1
  • Outlet pipe Ø1.97” (Ø50 mm) Terrain article no. 225.2G
 $48.00
362.790.00.1
  • Round cord ring, EPDM
 $5.00
Part No. Description List Price (USD)
152.682.00.1
  • Outlet seal, EPDM, push on
  • For Ø1.97” (Ø50 mm) tube
  • For use with Geberit Duofix bidet and lavatory carriers
 $5.00